Chris Langley (1 follower)
(chrislangley082296)
-
Chris Langley
Follow me
General > New ProductBlade > General
Hello everyone, This is a Brand new Just got 2-28-23 Blade Fusion 360 3s Smart helicopter.
I binded it to my IX14 and went out to fly it after checking over everything and it wouldn't spool up. I gave throttle input and nothing, So i brought it back to the table took off the blades and started looki...
See More
2 Comments
Share
-
Administrator
Tim Olson
I wouldn't like the way the main gear wobbles. Acts a bit like when the esc is set to wrong cell count instead of auto detect or correct cell count.
-
Administrator
George Benter
Check the clearance between the pinion and the main gear. Make sure it is not to tight and the teeth are meshing, and not to tight.
Chris Langley
Follow me
General > Looking for AdviceSpektrum > DX8
Hello everyone, So I have a question about radio updates, a club member has a DX8 G2 and has never done a up date on it it has version 1.00 on it. i was going to try and help him update it but the only way i knew how to get a update was to log onto my Spektrum account and grab updates for my 😱 8 G2...
See More
No reactions yet
2 Comments
React!
Share
Michael Kranitz
Administrator
Charles Maras
As I understand it , the radio needs to be registered on a My Spektrum account in order to accept the update. Updates are linked to serial numbers so when you downloaded your updates, they were linked to your serial number not his. Once he registers the radio, the update should be downloaded from ...
See More
2
React
Reply
Chris Langley
Follow me
General > General DiscussionSpektrum > iX14
Hello all, has anyone received the new IX14 yet Dealers and or from what I understood they are a few folks who got Demo models to use at thier flying fields, Anyone had any issues with it? I have one on order and now kinda worried cause I have read reports on RCG of one guy ( Think he runs a hobbyst...
See More
No reactions yet
4 Comments
React!
Share
Michael Kranitz
Administrator
Alex Albors
Hey Chris, the first shipment of iX14 are going out today to consumers. Retailers will also start selling them today.
React
Reply
Michael Kranitz
Administrator
Barry Buxton
Also interested to understand the reliability of the first release, I also saw the comments in RCG and as I would be using this in an expensive F3A plane I don’t want to put it at risk
1
React
Reply
Chris Langley
Follow me
General > Looking for AdviceE-flite > F-16 80mm
Can someone with the E flite 80 mm F-16 messure thier rear ( long) wing tube and let me know how many MM it is.
I have a crashed F-16 and i purchased the wing tube set EFL87889 and the new rear tube is 8mm where the one i took out is only 7, so the new tube doesn't slide into either wing but yet fi...
See More
No reactions yet
12 Comments
React!
Share
Oldest FirstNewest First
Michael Kranitz
Administrator
Dale Sturms
7.82mm or 5/16” inch diameter as measured with a caliper.
React
Reply
Michael Kranitz
Administrator
Chris Langley
Picture of the wings
React
Reply
Michael Kranitz
Administrator
Chris Langley
Up close picture of the wings. see the front just has White where the tube goes. the rear ones have black. looks just like the carbon rod that is going into them.
1
React
Reply
Show all
Community Guidelines
Privacy Policy
Contact
Help
© 2024 Fly RC Nation. All rights reserved.