Guys I'm trying to set up new airplane images on my nx8. I cant remember all the picture settings. I know they have to be in BMP format, but I can remember the pixel size requirements.
Thanks Erick
Thanks Erick
Erick Walbridge (3 followers)
(erickl49759070)
-
New iX14 switch touch sensitivity issue. Been trying to get the switch touch to work on my new ix14. Switches A and H will not setup correctly for some reason. I have to max out the sensitivity adjustment on A and H switches only to get a reversed indication...ie I get an indication of a touch wi...
See More
Andy Engle
Struggling with touch switches myself. No matter where I set sensitivity in calibration, there doesnt seem to be a way to get it to work reliably. Anybody here found a fix? (Just opened a ticket with HH)
Guys I need your help. Today I acquired a super clean never flown habu 32x. It has a problem with on the retract units. As you can see, it has a broken plastic insert that needs replaced. I'm trying to locate a new or used retract unit or one for parts and not break the bank. Any help would ...
See More
Max Trimble
Hey there, is it only the plastic? If so, I might have the right one. The issue is the electronics are fried.
Question about updating spektrum receiver firmware. Will updating a receiver in a SAFE/as3x BNF aircraft (my new a10 V2 64mm) wipe out the safe settings / as3x values preprogrammed in the unit? I was updating the ESC's (no issues) and decided to also check on the receiver firmware, and the spektr...
See More
Tom Cogswell
Updating the receiver will not wipe the settings 😊 Only if you change the profile via the PC programmer. Hope that helps!
